To be truly prepared for your CCNA and CCNP exams, you need real hands-on experience with real Cisco routers and switches. However, a production network is a really bad place to practice your configurations, but an excellent way to get fired and/or sued. The key to becoming a true CCNA and CCNP is assembling your own Cisco home lab.

You don’t have to spend a lot of money to do so; used Cisco equipment is cheaper than ever. It’s robust as well – I’ve bought literally hundreds of used routers and switches over the years and have had very few problems. I owe much of my skill to practicing configurations and troubleshooting in my own home lab.
Read the full story

One of the most common questions I get from CCNA and CCNP candidates who are setting up their own home labs is “What cables will I need?” The answer is “It depends.” As you know from your exam studies, the physical layout of your lab is what determines the cables you’ll need. Let’s take a look at the most common home lab cable types and when you will need them.

Straight-through cables have quite a few uses in a CCNA / CCNP home lab. You’ll need them to connect a switch port to an AUI port on a router (and you’ll need a transceiver for that as well). If you have an ISDN simulator, straight-through cables can be used to connect a router’s BRI port to the simulator.

Crossover cables are used to connect switches and allow them to trunk. If at all possible, get two switches in your home lab. This will allow you to gain valuable experience in manipulating root bridge election, working with STP, and creating EtherChannels.

DTE/DCE cables are used to connect two routers via their serial cables. If you are planning on using a frame relay switch in your lab, you’ll need several of these. You can also get some great practice in by directly connecting two routers and bringing the connection up (and making sure it stays up!). This is valuable practice for your CCNA exam.
Read the full story