Part of your CCNA / CCNP education is deciding what network topology to use when you’re putting together your home lab. Some of you are starting with one or two routers or switches, while others are starting with more. A customer recently sent me a list of his Cisco routers and switches that he has available for a home lab and asked for my help in coming up with the best way to use them.

There is no “right” or “wrong” answer to this question; again, part of the learning process is configuring and reconfiguring the physical topology of your lab. Let’s look at the routers and switches he has available, including the interfaces on each, and come up with one possible CCNA / CCNP home lab setup.

The equipment list:

Two 3620 routers. Each has 1 serial port and 2 ethernet ports.

One 3640 router. This has two ethernet cards, each with two ports, and two AUI ports.

Three 2503s, my personal favorite for home labs! These have 1 AUI port, 2 serial interfaces, and one BRI interface apiece.

One 2524 router. This has one serial port, 1 ethernet port, and one BRI interface.

One 4500 router. This has eight BRI ports, 2 ethernet ports, and more importantly, four serial ports.

He also has a 5200 access server, an ISDN simulator, one 2924 switch, and one 1924 switch.

Now, if you don’t have this much equipment to work with, don’t panic! Most CCNA / CCNP candidates don’t; this is more of an exercise in looking at what you do have and using it to the utmost.

As I’ve mentioned in many of my CCNA / CCNP home lab articles, an access server is a great thing to have. All he needs is an octal cable to connect his AS to the other devices we choose to use, and he’s all set. (If you need an access server sample configuration, there is one on my website in the Home Lab section.)
Read the full story

One of the most common questions I get from CCNA and CCNP candidates who are setting up their own home labs is “What cables will I need?” The answer is “It depends.” As you know from your exam studies, the physical layout of your lab is what determines the cables you’ll need. Let’s take a look at the most common home lab cable types and when you will need them.

Straight-through cables have quite a few uses in a CCNA / CCNP home lab. You’ll need them to connect a switch port to an AUI port on a router (and you’ll need a transceiver for that as well). If you have an ISDN simulator, straight-through cables can be used to connect a router’s BRI port to the simulator.

Crossover cables are used to connect switches and allow them to trunk. If at all possible, get two switches in your home lab. This will allow you to gain valuable experience in manipulating root bridge election, working with STP, and creating EtherChannels.

DTE/DCE cables are used to connect two routers via their serial cables. If you are planning on using a frame relay switch in your lab, you’ll need several of these. You can also get some great practice in by directly connecting two routers and bringing the connection up (and making sure it stays up!). This is valuable practice for your CCNA exam.
Read the full story

More CCNA and CCNP candidates than ever before are putting together their own home labs, and there’s no better way to learn about Cisco technologies than working with the real thing. Getting the routers and switches is just part of putting together a great CCNA / CCNP home lab, though. You’ve got to get the right cables to connect the devices, and this is an important part of your education as well. After all, without the right cables, client networks are going to have a hard time working!

For your Cisco home lab, one important cable is the DTE/DCE cable. These cables have two major uses in a home lab. To practice directly connecting Cisco routers via Serial interfaces (an important CCNA skill), you’ll need to connect them with a DTE/DCE cable. Second, if you plan on having a Cisco router act as a frame relay switch in your lab, you’ll need multiple DTE/DCE cables to do so. (Visit my website’s Home Lab Help section for a sample Frame Relay switch configuration.)

If you have multiple switches in your lab, that’s great, because you’ll be able to get a lot of spanning tree protocol (STP) work in as well as creating Etherchannels. To connect your switches, you’ll need crossover cables.

You’ll need some straight-through cables as well to connect your routers to the switches.

Finally, if you’re lucky enough to have an access server as part of your lab, you’ll need an octal cable to connect your AS to the other routers and switches in your lab. The octal cable has one large connector on one end and eight numbered RJ-45 connectors on the other end. The large connector should be attached to the async port on your AS, and the numbered RJ-45 connectors will be connected to the console ports on your other routers and switches.

Choosing and connecting the right cables for your Cisco CCNA / CCNP home lab is a great learning experience, and it’s also an important part of your Cisco education. After all, all great networks and home labs all begin at Layer One of the OSI model!